羅茨鼓風機是一種定容積回轉式氣體動力機械。氣缸由機殼和兩端墻板包容而成，一對相互“咬合”（因?yàn)橛虚g隙，兩葉輪并不直接接觸）的葉輪將進氣口與排氣口分隔開來，通過一對同步齒輪的轉動，兩葉輪在氣缸中作等速反方向旋轉，在旋轉過程中，進氣口的氣體不斷的被葉輪推移到排氣口，從而達到強制排氣的目的。下面我們來看一下羅茨鼓風機的參數參考：

Roots blower is a fixed volume rotary gas powered machinery. The cylinder is enclosed by a casing and two end wall panels. A pair of impellers that "bite" each other (because there is a gap, the two impellers do not directly contact) separate the intake and exhaust ports. Through the rotation of a pair of synchronous gears, the two impellers rotate in opposite directions at a constant speed in the cylinder. During the rotation process, the gas in the intake port is continuously pushed by the impellers to the exhaust port, thus achieving the purpose of forced exhaust. Let's take a look at the parameter reference of Roots blower below:

1、風量在單位時間內流進風機的實際氣體量，常用單位有m3/min。

1. The actual amount of gas flowing into the fan per unit time, commonly measured in meters per minute.

2、風壓即風機的全壓，常用單位為kpa、mmaq等。羅茨鼓風機

2. Wind pressure refers to the total pressure of a fan, commonly measured in units such as kPa and MMAQ. blower

3、輸出速度風機輸送風量的速度，單位為米/秒（m/s）。

3. Output speed: The speed at which a fan delivers air, measured in meters per second (m/s).

4、進口處的氣體密度羅茨風機進口的空氣/氣體的密度/單位容積的質量，單位為kg/m3。

4. The gas density at the inlet of the Roots blower is the density of the air/gas at the inlet divided by the mass per unit volume, measured in kg/m 3.

5、風機所處的高度風機安裝時所處的海拔高度，單位為米。

5. The altitude at which the fan is installed, measured in meters.

6、氣體的自然屬性羅茨鼓風機輸送的氣體是否有腐蝕性、刺激性、易燃性等。

6. The natural properties of gas: whether the gas transported by Roots blower is corrosive, irritating, flammable, etc.

7、風機的類型和布置風機安裝時要考慮到風的輸入輸出的位置，進出口管道的尺寸和軸承的位置等。

7. The type and layout of fans should take into account the position of wind input and output, the size of inlet and outlet pipelines, and the position of bearings when installing fans.

那么羅茨鼓風機要多久保養一次

So how often should the Roots blower be maintained

1.根據現場環境來定時清洗

1. Regularly clean according to the on-site environment

2.啟動時按時檢查郵箱的位置和油質，及時添加和更換，機器運行一個月要換一次齒輪油。三個月后需要換第二次新油。換油周期可根據油品質量確定，但不能超過半年。

2. Check the position and oil quality of the mailbox on time during startup, add and replace it in a timely manner, and change the gear oil once a month after the machine runs. We need to change the oil for the second time in three months. The oil change cycle can be determined based on the quality of the oil, but cannot exceed six months.

3.羅茨風機首次運行24小時，三角皮帶松緊調整一次；3-4天后，第二次調整皮帶松緊；一周后調整皮帶三次；一個月后再調整。以后注意觀察，發現異響、大電流及時檢查皮帶松緊度。

3. After the first 24 hours of operation of the Roots blower, adjust the tension of the V-belt once; After 3-4 days, adjust the tightness of the belt for the second time; Adjust the belt three times after one week; Adjust again in one month. Pay attention to observation in the future, and promptly check the tightness of the belt if any abnormal noise or high current is found.

本文由羅茨鼓風機友情奉獻.更多有關的知識請點擊:http://www.sctcjt.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is a friendly contribution from Roots blower For more information, please click: http://www.sctcjt.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message